Kajian Pengaruh Geometri Jalan terhadap Konsumsi Bahan Bakar dalam Optimasi Pengangkutan pada Kegiatan Penambangan Andesit di PT Mandiri Sejahtera Sentra (MSS) Desa Sukamulya, Kecamatan Tegalwaru, Kabupaten Purwakarta, Provinsi Jawa Barat

  • Ikbal Amru Teknik Pertambangan
  • Yuliadi Fakultas Teknik, Universitas Islam Bandung
  • Elfida Moralista Fakultas Teknik, Universitas Islam Bandung
Keywords: Geometri Jalan, Produktivitas, Rimpull

Abstract

Abstract. The geometry of haul roads is one of the factors that affect the production and consumption of fuel. The factors that influence it are the rolling resistance of the haul road, the slope of the haul road, and the haul road distance. For example, the haul road is made too uphill, so it requires higher fuel consumption. So with these parameters, it is necessary to plan the haul road geometry to get a calculation of fuel requirements that can be used as a reference when the mine operates and reduce operating costs (cost). This study aims to determine the effect of road geometry on more efficient fuel consumption based on road geometry standards following Ministerial Decree 1827 K/30/Mem/2018. Based on the calculation, the actual production of loading equipment is 376.68 tons/hour and the overall production of transportation equipment is 376.22 tons/hour with average fuel consumption of 31.83 liters/hour for loading equipment and 6, 35 liters/hour. The actual fuel ratio of loading equipment is 0.08 liters/BCM and transportation equipment is 0.17 liters/BCM and the actual fuel consumption per rate of loading equipment is 0.20 liters/rate and transportation equipment is 1.34 liters/rate. The actual fuel cost of loading equipment is Rp. 20,322,515.43 and transportation means Rp. 4,824,578.15. After re-evaluation related to road geometry in accordance with the standard Kepmen 1827 K/30/Mem/2018 by changing the slope to a maximum of 12% so that the travel time of the conveyance becomes faster, there is an improvement calculation. The average production of transportation equipment after the repair is 535.92 tons/hour, fuel consumption after the repair is 4.44 liters/hour and fuel consumption per cycle after the repair is 0.65 liters/hour. The fuel ratio after repair for transportation equipment is 0.08 liter/BCM and for fuel cost transportation equipment after the repair is Rp. 3,475,857.89.

Abstrak. Geometri jalan angkut merupakan salah satu faktor yang mempengaruhi produksi dan konsumsi bahan bakar. Faktor-faktor yang mempengaruhinya seperti  tahanan gulir yang dimiliki oleh jalan angkut, kemiringan jalan angkut serta jarak  jalan angkut. Contohnya jalan angkut dibuat terlalu menanjak, sehingga memerlukan konsumsi bahan bakar yang lebih tinggi. Maka dengan adanya parameter tersebut diperlukan perencanaan geometri jalan angkut untuk mendapatkan suatu perhitungan kebutuhan bahan bakar yang dapat digunakan sebagai acuan ketika tambang beroperasi dan mengurangi biaya operasional (cost). Penelitian ini bertujuan untuk mengetahui pengaruh geometri jalan terhadap konsumsi bahan bakar yang lebih efisien berdasarkan standar geometri jalan sesuai dengan Kepmen 1827 K/30/Mem/2018. Berdasarkan perhitungan didapat produksi aktual alat muat sebesar 376,68 ton/jam dan untuk produksi alat angkut keseluruhan adalah 376,22 ton/jam dengan rata-rata konsumsi bahan bakar untuk alat muat adalah sebesar 31,83 liter/jam dan angkut sebesar 6,35 liter/jam. Untuk fuel ratio aktual alat muat sebesar 0,08 liter/BCM dan alat angkut sebesar 0,17 liter/BCM dan konsumsi bahan bakar per ritase aktual alat muat sebesar 0,20 liter/ritase dan alat angkut 1,34 liter/ritase. Fuel cost aktual alat muat sebesar  Rp. 20.322.515,43 dan alat angkut sebesar Rp. 4.824.578,15. Setelah dilakukan evaluasi kembali terkait dengan geometri jalan yang sesuai dengan standar Kepmen 1827 K/30/Mem/2018 dengan mengubah kemiringan menjadi maksimal 12% sehingga waktu tempuh alat angkut menjadi lebih cepat maka adanya perhitungan perbaikan. Untuk produksi rata-rata alat angkut setelah perbaikan sebesar 535,92 ton/jam, konsumsi bahan bakar setelah perbaikan adalah 4,44 liter/jam dan konsumsi bahan bakar per ritase setelah perbaikan 0,65 liter/ritase. Fuel ratio setelah perbaikan untuk alat angkut sebesar 0,08 liter/BCM dan untuk fuel cost alat angkut setelah perbaikan sebesar Rp. 3.475.857,89.

Published
2022-01-22